Items where Subject is "Engineering"

Group by: Creators | Item Type
Number of items at this level: 75.

Article

Abdelfatah, Aliaa and Reda, Yasser and Abdel-Karim, Randa and El-Raghy, S. M. and Zohdy, Khaled M. (2020) Electrochemical Characterization of Electrodeposited Ni–Cu Foams and Their Application as Electrodes for Supercapacitors. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Adedeji, O. F. and Oyedijo, G. E. and Saka, B. A. and Orelaja, O. A. (2021) Design and Construction of a Two-way Gas Oven. Journal of Engineering Research and Reports, 21 (10). pp. 11-17. ISSN 2582-2926

Adewumi, A. A. and Olafimihan, E. O. and Itabiyi, O. E. and Akinrinade, N. A. (2023) Influence of Selected Parameters on the Product Yields of Broom Weed (Sida acuta) Pyrolysis. Journal of Engineering Research and Reports, 25 (7). pp. 136-144. ISSN 2582-2926

Aditya, R. and Raj, P. Yeswanth and Rao, Y. Thirupathi and Sai, T. Hema Venkata and Lakshman, A. and Devi, K. Thrilochana (2024) Weapon D - A Hybrid Approach for Detecting Weapons in Dark Environments Using Deep Learning Techniques. Journal of Engineering Research and Reports, 26 (5). pp. 202-209. ISSN 2582-2926

Al-Ansari, Nadhir and Adamo, Nasrat and Al-Hamdani, Mahdi Rasheed and Sahar, Kadhim and Al-Naemi, Riyadh E. A. (2021) Mosul Dam Problem and Stability. Engineering, 13 (03). pp. 105-124. ISSN 1947-3931

Areola, R. I. and Adetunmbi, A.O. and Okimi, Thomas O. (2024) Intelligent Energy Management System: Harnessing Fuzzy Logic for Charge Control. Journal of Engineering Research and Reports, 26 (4). pp. 120-132. ISSN 2582-2926

Bai, Xinbo and Wang, Tao and Zhu, Yuxuan and Luo, Guoqiang (2018) Expansion of Linear Analysis of Rayleigh-Taylor Interface Instability of Metal Materials. World Journal of Mechanics, 08 (04). pp. 94-106. ISSN 2160-049X

Bassey, Aniebiet Effiong and Johnson, Enyenihi Henry and Umoh, Gabriel Etim (2023) Secret Key Management in Wireless Sensor Network Based on Probabilistic Technique. Journal of Engineering Research and Reports, 25 (12). pp. 162-170. ISSN 2582-2926

Bean, Derek and Blunck, David L. (2021) Sensitivities of Porous Beds and Plates to Ignition by Firebrands. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Chen, Shuping and Chen, Zongpeng (2018) On the Reactivation of the Pre-Existing Normal Fault. World Journal of Mechanics, 08 (05). pp. 210-217. ISSN 2160-049X

Chikwe, Anthony Ogbaegbe and Nwanwe, Onyebuchi Ivan and Odo, Jude Emeka and Patrick, Aliene Chibuike and Onyejekwe, Ifeanyichukwu Michael and Okalla, Christian Emelu (2024) An Artificial Neural Network Model for Predicting Initial Water Saturation of Petroleum Reservoirs. Journal of Engineering Research and Reports, 26 (3). pp. 63-70. ISSN 2582-2926

Dasappa, Shruthi and Camacho, Joaquin (2021) Ultrafine Particulate Matter in Methane-Air Premixed Flames With Oxygen Enrichment. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Désiré, Koné Kigninman and Francis, Kouassi Adlès and Kouassi, Konan Hyacinthe and Dhib, Eya and Tabbane, Nabil and Asseu, Olivier (2021) Fractional Rider Deep Long Short Term Memory Network for Workload Prediction-Based Distributed Resource Allocation Using Spark in Cloud Gaming. Engineering, 13 (03). pp. 135-157. ISSN 1947-3931

Dölle, Klaus and Lex, Simon and Button, Nathaniel (2023) Treatment of Effluent with an Anaerobic Aerobic Effluent Treatment System. Journal of Engineering Research and Reports, 25 (7). pp. 145-158. ISSN 2582-2926

El Naschie, Mohamed S. (2018) From Nikolay Umov E=kmc2 via Albert Einstein’s E=γmc2 to the Dark Energy Density of the Cosmos E=(21/22)mc2. World Journal of Mechanics, 08 (04). pp. 73-81. ISSN 2160-049X

Eze, Ifeyinwa Uchenna and Okwonna, Obumneme Onyeka and Komi, Gentle Wilson and Hart, Aduabobo Ibitoru and Vincent-Akpu, Ijeoma (2024) Comparative Analysis of Kerosene Grade Fuel from Pyrolysis of HDPE and LDPE Waste Plastics. Journal of Engineering Research and Reports, 26 (2). pp. 1-13. ISSN 2582-2926

Ezeh, Okechukwu and Ikiensikimama, Sunday Sunday and Akaranta, Onyewuchi (2021) Critical Review of Polymer Flooding in Daqing Field and Pelican Field: Case Studies of the World’s Largest Polymer Flooding in Light and Heavy Oil Reservoirs, Respectively. Journal of Engineering Research and Reports, 21 (10). pp. 25-40. ISSN 2582-2926

Forsbach, Fabian (2020) Stress Tensor and Gradient of Hydrostatic Pressure in the Half-Space Beneath Axisymmetric Bodies in Normal and Tangential Contact. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Ghosh, Swapan Kumar (2018) Conspiracy Determines World War III with Reference to Several Windows’ Channel in Connection with Earth Observation Satellite. World Journal of Mechanics, 08 (04). pp. 107-111. ISSN 2160-049X

Greiner, Alexander and Reiter, Nina and Paulsen, Friedrich and Holzapfel, Gerhard A. and Steinmann, Paul and Comellas, Ester and Budday, Silvia (2021) Poro-Viscoelastic Effects During Biomechanical Testing of Human Brain Tissue. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Guo, Yuanjie and Yan, Jihong and Wang, Xingbo (2023) Toolpath Smoothing Based on Controlled NURBS Interpolation. Journal of Engineering Research and Reports, 25 (12). pp. 60-75. ISSN 2582-2926

Hagh Shenas, Mohammad Ali and Sharafi, Hassan (2021) Numerical Analysis of an Unsaturated Capillary Barrier Cover System. Journal of Engineering Research and Reports, 21 (10). pp. 41-53. ISSN 2582-2926

Hartness, Samuel W. and Rotavera, Brandon (2021) Dependence of Biofuel Ignition Chemistry on OH-Initiated Branching Fractions. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Hermann, Yanogo Kiswendsida Jean and Frederic, Ouedraogo Tounwendyam (2023) Study on the Use of Artificial Intelligence for Cybersecurity in Companies: Case of Companies in Burkina Faso. Engineering, 15 (12). pp. 798-809. ISSN 1947-3931

Krebs, Eric and Gravenhof, Dylan A. and Caasi, Joshua M. A. and Hanten, Robert P. and Huysman, Nathan and Voorhees, Jill M. and Barnes, Michael E. (2021) Fish Ladder Weir Modifications to Minimize Escapement. Engineering, 13 (04). pp. 173-183. ISSN 1947-3931

Lin, Emil Edipovich (2018) Revealing the Uncertainty and Absolute Certainty Principles in the Kinetics of Objects Formation. World Journal of Mechanics, 08 (04). pp. 82-93. ISSN 2160-049X

Mendaza-DeCal, Rosa and Peso-Fernandez, Salvador and Rodriguez-Quiros, Jesus (2021) Test of Designing and Manufacturing a Polyether Ether Ketone Endoprosthesis for Canine Extremities by 3D Printing. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Obetta, J. L. and Olusanyan, O. O. and Oyediran, M. O. and Wahab, W. B. and Olusesi, A. T. and Elegbede, A. W. (2021) Simulation of a Model for International Traveler’s Check-In Process Using Arena Software Tool. Engineering, 13 (03). pp. 125-134. ISSN 1947-3931

Obuebite, Amalate Ann and Okwonna, Obumneme (2024) Preliminary Evaluation of Cashew Gum Exudate as a Green Scale Inhibitor. Journal of Engineering Research and Reports, 26 (5). pp. 210-219. ISSN 2582-2926

Pochet, Maxime and Jeanmart, Hervé and Contino, Francesco (2020) A 22:1 Compression Ratio Ammonia-Hydrogen HCCI Engine: Combustion, Load, and Emission Performances. Frontiers in Mechanical Engineering, 6. ISSN 2297-3079

Reichelt, Manuel and Cappella, Brunero (2021) Micro- and Nanowear of Self-Mated Steel Generated and Studied With an AFM at the Single Asperity Level. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Salameh, Elias and Al-Ansari, Nadhir (2021) Deficient Developmental Planning Leading to Water Conflicts across Political Borders: The Way Forward. Engineering, 13 (03). pp. 158-172. ISSN 1947-3931

Susan, Maingi and Wawire, Noah (2021) On Farm Performance Evaluation of Back Pack Weeder for Weed Control in Cassava: A Case of Busia County, Kenya. Journal of Engineering Research and Reports, 21 (10). pp. 18-24. ISSN 2582-2926

V. Oleka, Chioma and Akpado, K. A. and C. Agbaraji, Emmanuel (2021) Flexible Joint Robotic Manipulator Performance Improvement Using Mixed Synthesis Technique. Journal of Engineering Research and Reports, 21 (10). pp. 1-10. ISSN 2582-2926

Yazdi, Naghmeh Talebi (2023) A Multi-stage Optimization Strategy Based on Fuzzy QFD and Fuzzy Swara to Adopt Blockchain Technology in the Drug Supply Chain. Journal of Engineering Research and Reports, 25 (11). pp. 201-220. ISSN 2582-2926

Zhang, Peng and Wang, Pai (2021) Boundary Reflections of Rolling Waves in Cubic Anisotropic Material. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Zhou, Jiwei and Zhou, Mengxiang and Ma, Liuhao and Wang, Yu (2021) Planar Light Extinction Measurement of Soot Volume Fraction in Laminar Counterflow Diffusion Flames. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Zhou, ShanShan (2024) Development in the Study of Mechanical Prop-erties and Damage Constitutive Models of Rub-ber-Reclaimed Concrete. Journal of Engineering Research and Reports, 26 (6). pp. 298-306. ISSN 2582-2926

Book Section

Abass, Balogun (2023) Analysis of Power Quality Problems on Nigerian 330 KV Power System Using Statcom with Voltage Sensitivity Index. In: Theory and Applications of Engineering Research Vol. 1. B P International, pp. 13-37. ISBN 978-81-967636-2-6

Al-Harbi, Mansour and Al-Nefai, Abdullah and Al-Jarallah, Sami and Al-Dossary, Abdullah and Jagan, Yannam (2020) Advanced Study on Comprehensive CFD Simulation of the Ladle Cycle toward Lining Service Life Optimization. In: Recent Developments in Engineering Research Vol. 9. B P International, pp. 79-89. ISBN 978-93-90516-27-8

Ali, Rehana and Mohamed, Nazim and Boodlal, Donnie and Maharaj, Rean (2020) Properties of Coir Fibre Reinforced Bituminous Mixes. In: Recent Developments in Engineering Research Vol. 9. B P International, pp. 90-104. ISBN 978-93-90516-27-8

Alka, Verma and Neelam, Shrivastava and Singh, Anil Kumar and Shilpee, Patil and Singh, Prasanna Kumar and Pandey, Anil Kumar (2022) Study of Rectangular Microstrip Antenna Loaded with Gunn Diodes. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 171-181. ISBN 978-93-5547-686-9

Arellano, Steven Valentino E. and Caguicla, John Mark Gabriel N. and Desuasido, Lawrence Alexis P. (2020) Investigating the Sign Language and Speech Translation Wearable Device with Android Application for Special Education Schools in the Philippines. In: Recent Developments in Engineering Research Vol. 6. B P International, pp. 13-30. ISBN 978-93-90431-78-6

Arunkumar, D. T. and Pattanaik, Ashutosh and Basavakumar, K. G. (2021) Investigation on Wear Behaviour and Microstructure Analysis of Al-7075 Alloy Reinforced with Mica and Kaolinite. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 111-117. ISBN 978-93-90888-10-8

Asibeluo, U. N. and Madueme, T. C. (2021) Studies on Risk-Based Security Assessment of Power System Voltages of 330kV 41-Bus Transmission Grid in Nigeria. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 118-129. ISBN 978-93-90888-10-8

Belkacem, Bendjaima (2022) Analysis of Meridian Flow in Gas Turbines: Design and Performances. In: Techniques and Innovation in Engineering Research Vol. 6. B P International, pp. 22-43. ISBN 978-81-959996-6-8

Belkacem, Bendjaima (2022) Meridian Flow Analysis in Axial Multistages Turbomachinery: Case of Gas Turbine Design. In: Techniques and Innovation in Engineering Research Vol. 6. B P International, pp. 44-69. ISBN 978-81-959996-6-8

Borisov, V. D. (2020) The Analysis of Electromagnetic Radiation at Destruction of Structural Materials. In: Recent Developments in Engineering Research Vol. 9. B P International, pp. 21-64. ISBN 978-93-90516-27-8

D., Constantinescu and A. B., Carlan (Serban) (2024) Elements for the Modelling of the Thermal Process in Heating Furnaces for Steel Forming. In: Theory and Applications of Engineering Research Vol. 5. B P International, pp. 153-165. ISBN 978-81-970064-6-3

Gorgis, Ikbal Naeem and Khalil, Wasan Ismail and Mahdi, Zeinab Raad (2021) Behavior of High Performance Fiber Reinforced Concrete Columns: Experimental Investigation. In: Novel Perspectives of Engineering Research Vol. 3. B P International, pp. 37-55. ISBN 978-93-5547-218-2

Ifeanyichukwu, Nkeleme Emmanuel and Shakantu, Winston and Anosike, Nwabueze Micheal and Ikenna, Achigbu Onyemaeze (2021) An Assessment of Solid Waste Management Generated in Eziobodo Community, Imo State, Nigeria. In: Novel Perspectives of Engineering Research Vol. 3. B P International, pp. 25-36. ISBN 978-93-5547-218-2

Kayyidavazhiyil, Abhilash and Kaipacheri, Sheena (2022) Trusted Execution Environments for Internet of Things Devices: A Recent Study. In: Techniques and Innovation in Engineering Research Vol. 6. B P International, pp. 79-95. ISBN 978-81-959996-6-8

Kumar, K. S. Sudeep and Rajashekhar, C. R. (2021) A Review on Impact of Bio-diesel Fuel on Durability of CI Engines. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 106-110. ISBN 978-93-90888-10-8

Kumar, Preeti Nand (2022) Use of Alternative Raw Materials and Pulp Blending Improves the Strength Properties of Pulp and Paper. In: Techniques and Innovation in Engineering Research Vol. 6. B P International, pp. 96-106. ISBN 978-81-959996-6-8

Lakshmi, A. Vijaya and Ghali, V. S. (2020) Study on Machine Learning Based Automatic Defect Detection in Non Stationary Thermal Wave Imaging. In: Recent Developments in Engineering Research Vol. 9. B P International, pp. 65-78. ISBN 978-93-90516-27-8

Laquatra, Joseph (2022) The Need for Building Science Education: A Review. In: Techniques and Innovation in Engineering Research Vol. 6. B P International, pp. 70-78. ISBN 978-81-959996-6-8

Lazuardi, P. Bugy and Nurfadhli, . and Triyono, . (2022) Experimental Study of White Layer Thickness and Hardness Reduction in EDM Using Flux Powder. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 163-170. ISBN 978-93-5547-686-9

Mahatme, U. B. and Gedam, R. S. and Tidke, G. D. and Utane, R. D. and Rangari, A. H. (2021) Detailed Study on the Effect of Oxidant, Dopant and MO Additive Loading on Morphology, Conductivity and Dielectric Constant of 3D Conducting Polymer PPy/a-Fe2O3 Nanocomposites. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 140-155. ISBN 978-93-90888-10-8

Maheswari, G. and Chitra, K. (2020) Hierarchical Self Organizing Maps for Reusability Measurement and Performance Metrics Assessment of Software Components. In: Arts and Social Studies Research Vol. 2. B P International, pp. 143-154. ISBN 978-93-90149-36-0

Mohan, D. and Sheela, K. Anitha (2021) Performance Improvement in Speech Enabled IVR Systems Using Artificial Band Width Extension: Recent Development. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 130-139. ISBN 978-93-90888-10-8

N. K., Geetha and B., Vivekanandam and Makgato, Seshibe and Pappula, Bridjesh (2023) FGP Beam Using Higher Order Shear Deformation Theory - Numerical Vibrational Analysis. In: Theory and Applications of Engineering Research Vol. 1. B P International, pp. 1-12. ISBN 978-81-967636-2-6

Nastasescu, V. and Marzavan, S. (2023) The Equivalent Material Concept in Functionally Graded Plates Calculus. In: Theory and Applications of Engineering Research Vol. 1. B P International, pp. 38-63. ISBN 978-81-967636-2-6

Ngoy, E. K. (2021) Prediction of Thermal Strains in Fibre Reinforced Plastic Matrix by Discretisation of the Temperature Exposure History: An Advanced Study. In: Novel Perspectives of Engineering Research Vol. 3. B P International, pp. 56-64. ISBN 978-93-5547-218-2

Pise, S. M. and Ghewade, D. V. and Sapali, S. N. and Pise, P. S. (2024) Energy Savings through Retrofitting Waste Heat Recovery System on Bulk Milk Cooler. In: Theory and Applications of Engineering Research Vol. 5. B P International, pp. 139-152. ISBN 978-81-970064-6-3

Pushpa, M. and Nirmala, K. and Vijayalakshmi, J. (2021) Semi-Automated Text Categorization Using Demonstration and Integration Based Term Set. In: New Approaches in Engineering Research Vol. 1. B P International, pp. 11-19. ISBN 978-93-91215-70-5

Rafique, Muhammad Musaddique Ali (2020) Investigating the Effect of Laser Additive Manufacturing on Microstructure Evolution of Inoculated Zr47.5Cu45.5Al5Co2 Bulk Metallic Glass Matrix Composites. In: Recent Developments in Engineering Research Vol. 9. B P International, pp. 1-20. ISBN 978-93-90516-75-9

Rao, Sathuluri Mallikharjuna and Sasikala, G. (2020) Reconfigurable Antenna for Satellite Applications Using Micromechanical Actuation Switches. In: Recent Developments in Engineering Research Vol. 6. B P International, pp. 1-12. ISBN 978-93-90431-78-6

Rasheed, Aina and Kareem, Buliaminu (2024) Adjustable Bed Development for a Micro-Turbine Electric Power Generator Plant. In: Theory and Applications of Engineering Research Vol. 5. B P International, pp. 166-180. ISBN 978-81-970064-6-3

Rushdi, Ali Muhammad Ali and Badawi, Raid Salih (2021) Map Visualization of Cause-Effect Relations in Qualitative Comparative Analysis. In: Novel Perspectives of Engineering Research Vol. 3. B P International, pp. 1-24. ISBN 978-93-5547-218-2

Sai, P. H. V. Sesha Talpa and Raj, R. Ajith and Anand, V. G. Krishan (2022) Influence of Nano-fluid MQL in Machining Processes: A Review. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 151-162. ISBN 978-93-5547-686-9

Staretu, Ionel (2021) Classification of Industrial Robots According to the Number of Degrees of Mobility-structural Synthesis, Useful Configurations, Work Spaces and Kinematics. In: New Approaches in Engineering Research Vol. 1. B P International, pp. 29-43. ISBN 978-93-91215-70-5

Vinutha, K. and Ashwini, N. and Raj, Amrit and Sukruth, Jayam and Praneeth, M. and Anand, Shubham (2021) Driver Drowsiness Detection and Alert System Using Computer Vision. In: New Approaches in Engineering Research Vol. 1. B P International, pp. 1-10. ISBN 978-93-91215-70-5

Wang, Zijian and Yu, Wenbo and Yu, Zhongjun and Luo, Yunhua and Li, Jiamu (2022) Study on Neural Network-Guided Sparse Recovery for Interrupted-Sampling Repeater Jamming Suppression. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 147-166. ISBN 978-93-5547-391-2

Wattal, Suneel (2021) Recent Study on Maturity Model for IT Managed Services. In: New Approaches in Engineering Research Vol. 1. B P International, pp. 20-28. ISBN 978-93-91215-70-5

Woo, Seong-Woo and O’Neal, Dennis L. (2020) Study on Improving the Reliability of a Domestic Refrigerator Compressor Subjected to Repetitive Loading. In: Recent Developments in Engineering Research Vol. 9. B P International, pp. 105-124. ISBN 978-93-90516-27-8

This list was generated on Mon Dec 23 13:54:46 2024 UTC.